Pellet Heating Boilers
PZ 100 RL 100KW
You are looking for a pellet heating appliance for large scale buildings, than the Biotech PZ100RL appliance is the ideal solution.
The Biotech PZ100RL appliance is especially designed for to deliver maximum energy to buildings such as:
– Large housing estates above 1’000 m2
– Apartment blocks
– Enterprises
– Factories
– Warehouses
The Biotech PZ100RL heating appliance has a performance range from 24.9 – 99.9 kW and is ideal to serve energy to buildings up to a surface of approximately 1’000 – 1’500m2. For bigger sized buildings up to about 4’500 m2 simply two or three PZ100RL appliances will be connected through cascade regulation and will optimally deliver energy as and when needed.
With a great nominal efficiency of above 95% the appliance is outstanding in its class and is leading in technology. Remote maintenance is made available through the capability of connecting the appliance with the internet and directly accessing the system from anywhere in the world.
BIOTECH PZ 100 RL – THE FULLY AUTOMATED PELLET HEATING APPLIANCE!
Consisting of:
– Electric connection: 230 VAC / 50Hz, 16 A
– Appliance body with efficient winding insulation
– Automatic ignition of pellets (hot air ignition system)
– Speed regulated induced draft and secondary air fan
– Lambda probe and air mass sensors (primary and secondary air)
– Temperature resistant tubular heat exchanger with automatic cleaning
– Burning system made of heat resistant stainless steel with automatic burner grate cleaning
– Daily pellet container including 2 strainers (with notification for fullness) and 2 suction turbines
– Main Pellets storage room (up to 40 tons) can be within a distance of 15 – 20 meters away from the appliance
– Great dimensioned ash boxes, including as compression (to be emptied after 8 – 10 tons of burned pellets)
– Micro processor regulation with graphic screen for menu navigation
– Up to 16 regulated heating circuits can be activated
– Assembly and operational manual
Specific features:
– Control and remote maintenance possible via internet with appropriate software!
– Request and amendment of parameters via visualization software
– Operation unit is removable and can be used as room regulation device
– Easy placement into heating room as appliance, daily storage container and covering
Nominal heat performance (kW) – 99.9
Degree of efficiency at full load (%) – 95.1
Degree of efficiency at part load (%) – 95.6
Max.adjustable boiler temperature (C) – 90
Tolerable operating pressure (bar) – 3
CE designation according to low tension guide lines
Exhaust gas temperature at full load (C) – 110
Exhaust gas temperature at part load (C) – 73
Exhaust gas mass flow at full load (g/s) – 52
Exhaust gas mass flow at part load (g/s) – 13
CO2 at full load (Vol%) – 15.1
CO2 at part load (Vol%) – 13.7
Necessary delivery pressure (mbar/Pa) – 0,2/20
Width boiler (mm) – 1812
Depth boiler (mm) – 1239
Total depth (mm) – 1256 2)
Height of boiler (mm) – 1947 1)
Height of smoke tube connection (mm) – 1428 1)
Height of flow (mm) – 554 1)
Height of return flow (mm) – 1469 1)
Height of ventilation (mm) – 1551 1)
Diameter of smoke tube connection (mm) – 200
Total weight (kg) – 951
Water content (lt) -250
Reservoir – automatically usable (kg) – 201
Ash boxt (lt) – 2 x 35
Standby (W) – 15
Filling – Turbine (W) – 3200
Grate cleaning (W) – 65
Pre-filling (W) – 75
Ignition (W) – 1020
At 100% performance (W) – 200
MINIMUM DISTANCES TO WALLS
Backward (mm) – 750
Left to wall (mm) – 500
Right to walls (mm) – 750
CONNECTIONS
Flow (inch) – 2
Return flow (inch) – 2
Ventilation for boiler (inch) – 1/2
Appliance emptying (inch) – 3/2
HEATING WATER FLOW RESISTANCE
ΔT = 20K (mbar) – 5
ΔT = 10K (mbar) – 20
VOLUME
In operation (DB) – 35
During suction (DB) – 67
1) Excl. adjustable feet
2) Incl. exhaust gas pipe
Pellets consumption:
-Minimum 6 kg/h
-Maximum 20 kg/h at full capacity
